Contact us

location: Home > Contact us > Technical support
  • [method] pretreatment method of ion exchange resin

    Ion exchange resins for industrial products must be pretreated to remove excess solvents, oligomers, or other impurities in the resin, which may affect the exchange and effluent quality It can also improve the stability of the resin to be transferred to the desired ionic form, and i

    2016-12-14
  • Application of adsorption resin in wastewater treatment

    This paper introduces the application of adsorption resin in waste water treatment, with emphasis on the treatment of phenolic wastewater, acid waste water and sulfanilamide wastewater

    2016-12-14
  • [method] the general use of macroporous adsorption resin

    feed processing in 1 ~ 4BV hr flow rate through the exchange column, not the resin layer with bubbles (experimental exchange column requires resin filling height to diameter ratio of more than 3, in the production of

    2016-12-14
  • [method] pretreatment method of macroporous adsorption resin

    Before the use of macroporous adsorption resin, according to the requirements of the use of different degrees of pretreatment, the resin is the residual inert solvent removal Resin pretreatment method:

    2016-12-05